Non Explosion Proof Electric Pumps For Wide Web Presses

Electric Motor Driven Ink Pump
This specification is for USA & European Market
Suitable for non-hazardous areas.
Standard Flexographic and Gravure ink applications
380/415/3/50 or 440/3/60 Voltage requirement
World Class Specification suitable for use on old Langston and new Sun Automation presses
Nylon coating for easy cleaning
ATEX approved (Link)
More Pictures of this pump
Picture 1
Picture 2

Accessories for this pump.Accessories

Videos
Impeller replacement Video
Assembling The motor & Fitting the 091 Impeller Video
Replacing the Shaft Video

Electric Motor Driven Ink Pump
This specification is for use in North & South America
It has an immersed length of 12″ (305 mm) for use in the standard U.S. pail
Suitable for non – hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
110/220/1/60 Voltage Required. NON Explosionproof
Bypass Mixing System
Three Stainless Steel Rod Design
More Pictures of this pump
Picture 1
Picture 2

Centrifugal pump setup (Link)
Accessories for this pump.Accessories

Video
Bypass Mixing System Video

Electric Motor Driven Ink Pump
This specification is for use in Canada
It has an immersed length of 356 mm for use in the standard Canadian pail
Suitable for non hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
110/220/1/60 Voltage Required. NON Explosionproof
Bypass Mixing System
Three Stainless Steel Rod Design
More Pictures of this pump
Picture 1
Picture 2

Centrifugal pump setup (Link)
Accessories for this pump.Accessories

Video
Bypass Mixing System Video

Electric Motor Driven Ink Pump
This specification is for use in North & South America
It has an immersed length of 12″ (305 mm) for use in the standard U.S. pail
Suitable for non – hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
240/440/3/60 Voltage Required. NON Explosionproof
Bypass Mixing System
Three Stainless Steel Rod Design

More Pictures of this pump
Picture 1
Picture 2

Centrifugal pump setup (Link)
Accessories for this pump.Accessories
Video
Bypass Mixing System Video

Electric Motor Driven Ink Pump
This specification is for use In Canada
It has an immersed length of  (355 mm) for use in the standard U.S. pail
Suitable for hazardous areas. Stands in a 35 Litre container.

This pump is a special length designed specifically for the Standard Canadian Ink Pail.
It is 50 MM longer than all standard US & European pumps. Consequently there is no ink wastage in the Canadian container.

Standard Flexographic and Gravure ink applications
240/440/3/60 Voltage Required. NON Explosionproof
Bypass Mixing System
Three Stainless Steel Rod Design
Nylon Impeller
Lightweight design

More Pictures of this pump
Picture 1
Picture 2
Centrifugal pump setup (Link)
Accessories for this pump.Accessories

Video
Bypass Mixing System Video

Electric Motor Driven Ink Pump
This specification is for the USA,Canada & South American Market
Suitable for non-hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
230/460/3/60 Voltage requirement
Bypass Mixing System
Nylon coating for easy cleaning
More Pictures of this pump
Picture 1
Centrifugal pump setup (Link)
Accessories for this pump.Accessories
Dimensions (Link)

Videos
Bypass Mixing System Video
Impeller replacement Video
Assembling The motor & Fitting the 091 Impeller Video
Replacing the Shaft Video

Air Motor Driven Ink Pump (High HP/KW)
This specification is for use in the North American Market
IHP/0.78KW Extra power for heavier inks
Suitable for hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
Lubricated air pressure at 25 – 100 PSI required
Bypass Mixing System
Nylon coating for easy cleaning
ATEX approved (Link)
More Pictures of this pump
Picture 1
Picture 2
Centrifugal pump setup (Link)
Accessories for this pump.Accessories
Dimensions (Link)

Videos
Installing the FRL Video
Bypass Mixing System Video
Impeller replacement Video
Assembling The motor & Fitting the 091 Impeller Video
Replacing the Shaft Video

Air Motor Driven Ink Pump
This specification is for use in Canada
It has an immersed length of 356 mm for use in the standard Canadian pail
Suitable for hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
Lubricated air pressure at 25 – 100 PSI required
Bypass Mixing System
Three Stainless Steel Rod Design
ATEX approved (Link)
More Pictures of this pump
Picture 1
Picture 2
Dimensions (Link)
Centrifugal pump setup (Link)
Accessories for this pump.Accessories

Videos
Bypass Mixing System Video
Installing the FRL Video
Installing the Air Motor Kit Part One (Includes the Tool Kit)
Installing the Air Motor Kit Part Two  (Kit Details)
Installing the Air Motor Kit Part Three (Disassembling the Motor)
Installing the Air Motor Kit Part Four (Assembling the Motor)

Air Motor Driven Ink Pump
This specification is for use in Canada
It has an immersed length of 356 mm for use in the standard Canadian pail
Suitable for hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
Lubricated air pressure at 25 – 100 PSI required
Bypass Mixing System
Three Stainless Steel Rod Design
ATEX approved (Link)
Note: This pump has a high Kilowatt rating for heavier inks. 0.55 Kw – 0.75 Kw
More Pictures of this pump
Picture 1
Picture 2
Dimensions (Link)
Centrifugal pump setup (Link)
Accessories for this pump.Accessories

Videos
Bypass Mixing System Video
Installing the FRL Video

Air Motor Driven Ink Pump
This specification is for use Worldwide
It has an immersed length of 305 mm (12″)
Suitable for hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
Lubricated air pressure at 25 – 100 PSI required
Bypass Mixing System
Three Stainless Steel Rod Design
ATEX approved (Link)
Note: This pump has a high Kilowatt rating for heavier inks. 0.55 Kw – 0.75 Kw
More Pictures of this pump
Picture 1

Centrifugal pump setup (Link)
Accessories for this pump.Accessories

Videos
Installing the FRL Video

Air Motor Driven Ink Pump
This specification is for use in the United States
It has an immersed length of 305 mm for use in the standard U.S. pail
Suitable for hazardous areas. Stands in a 5 gallon/25 Litre container
Standard Flexographic and Gravure ink applications
Lubricated air pressure at 25 – 100 PSI required
Bypass Mixing System
Three Stainless Steel Rod Design
ATEX approved (Link)
More Pictures of this pump
Picture 1
Picture 2
Centrifugal pump setup (Link)
Accessories for this pump.Accessories

Dimensions >(Link)

Videos
Bypass Mixing System Video
Installing the FRL Video