Description
1078 Nylon Coated Lo Flow
Suitable for hazardous areas. Stands in a 2 gallon/8 Litre container
Standard Flexographic and Gravure ink applications
Lubricated and filtered air required 20 PSI Minimum – 100 PSI Maximum
Bypass Mixing System Optional (Part Number 2010)
Nylon coating for easy cleaning
Extra help on this pump (Link)
Accessories for this pump.Accessories
Installing the FRL Video
Recommended Oil for the FRL (Link)
Dimensions (Link)
Note :
This pump is available in two configurations. One with a 9″ (230mm)
Lid and a 2 gallon (8 Liter) container.
The other option is an 11′ (280mm) Lid and a 3 gallon (12 Liter) container. See 1078-11
1178 Trifugal Stainless Rods Lo Flow
Suitable for hazardous areas. Stands in a 2 gallon/3 Litre container
Standard Flexographic and Gravure ink applications
Lubricated and filtered air required 20 PSI Minimum – 100 PSI Maximum
Bypass Mixing System Optional (Part Number 2010)
Three Stainless Steel Rods
Extra help on this pump 1178.pdf
Another Photo (Link)
Accessories for this pump.Accessories
Installing the FRL Video
Note :
This pump is also available with a 11″ (280mm) Lid and a 3 gallon (11Liter) container.
Model 1178-11
1176 Trifugal Stainless Rods – High Power
Suitable for hazardous areas. Stands in a 3 gallon/12 Litre container
Standard Flexographic and Gravure ink applications
Lubricated and filtered air required 20 PSI Minimum – 100 PSI Maximum
Bypass Mixing System Optional (Part Number 2010)
Three Stainless Steel Rods
High Horsepower Application (0.5HP/037KW) for Heavier Inks
Picture with container (Link)
Another Pump Picture (Link)
Dimensions (Link)
Accessories for this pump.Accessories
Installing the FRL Video
This pump is used for applications that require more horsepower for heavier inks.
1178-13 Trifugal Stainless Rods Low Flow for 5 Gallon Containers
Air Motor Driven Ink Pump – For Narrow Web & Small Presses
Suitable for hazardous areas. Stands in a 5 gallon/20 Litre container
Standard Flexographic and Gravure ink applications
Lubricated and filtered air required 20 PSI Minimum – 100 PSI Maximum
Bypass Mixing System Optional (Part Number 2010)
Three Stainless Steel Rods
Setup help on this pump 1178
Accessories for this pump.Accessories
Installing the FRL Video
Setup Help for the FRL ( Link)
Extra Picture of this pump ( Link)
Note :
This pump has a 12″(305mm) Diameter Lid and an immersed length of 12″ (305mm)
Therefore it fits into a standard 5 Gallon (20 Litre) Container. This makes it ideal for printers
who need a Lo Flow but use 5 Gallon Containers for their ink.